4 CAMERA - 180FT NIGHT VISION - 1080p - MANUAL ZOOM - BULLET KIT
This kit includes the following:(1) Real Time High Performance 4 Camera Surveillance DVR #5104H-2
This DVR has it all!
- 1080p HD - resolution viewing and recording
- Recording - 1080p@15fps, 720p@30fps
- H.264 High definition video compression
- Smart phone & internet viewing, PC & Mac
- Motion activated recording
(1) 1 Terabyte Internal Hard Drive Installed
The DVR stores the video footage on an internal hard drive. The size of the drive and the recording options determine the total number of days the system can store. Typically a 1 Terabyte hard drive can store 2+ weeks of footage. Setting all cameras to record only when motion is detected can more than triple the storage capacity to 6+ weeks.
(4) Weatherproof - HD 1080p - Outdoor HD Bullet Camera - 180ft Night Vision Item #P180Z
- Color HD 1080p resolution, 1920x1080 pixels
- Weatherproof metal housing
- 180ft Night vision
- Wall or ceiling mount
- Quick connect video & power pigtail
- 2.8-12mm Manual Zoom Lens
- Auto iris
DNR – Digital Noise Reduction
Our CVI 1080p cameras are equipped with “Digital Noise Reduction" technology. This allows the camera to produce high performance crystal clear images in poor lighting conditions. The DNR technology compares one frame to the next and intelligently removes any tiny specs in each frame that do not match; this greatly increasing the video quality in poor lighting conditions. Not only is a higher quality image produced, but DNR also reduces the video file size resulting in more days of video storage on the DVRs hard drive. This feature is found in only the highest quality cameras.
This camera is equipped with a manual zoom 2.8-12mm lens. The manual zoom lens allows you to mount the camera and then, using the zoom knob on the camera, adjust or “zoom” the viewing area in or out until you get the perfect view. The green lens chart below indicates viewing distances associated with this lens.
(4) 60ft Video and Power Cable with Pre-made Fittings #Cable-60
Our pre-made 60 foot video and power cables make installing a security camera a breeze. No cutting, stripping or hassling with fittings, just plug and play, it doesn't get any easier.
(1) Four Camera Plug & Play Power Supply #PWR-4IN1
This plug & play power supply provides power for up to 4 cameras. Only one wall outlet required to power all four cameras. The quick connect pigtails provide plug and play connections, no messing with fittings or terminal blocks!
(2) FREE Outdoor "Video Surveillance" Warning Stickers
Durable PVC 3"x4" video security warning window sticker. Great for store windows, doors or any area where deterring theft or vandalism is needed. 10 year fade resistant guarantee. Great for indoor or outdoor display. Let them know you're watching!
FREE - 3 Day Continuous Cloud Storage
This system includes free video Cloud storage. Stream one or all your cameras to our secure Cloud Video Storage service for secure video backup. The Cloud stores a continuous 3 days of recording at all times FREE!.You can increase the amount of backup storage days as you need for a small monthly fee. Click below for more details.
(1) FREE - Video Clip Transfer Drive
This system includes an 8 gigabyte USB flash drive. The unit serves two purposes; first we pre-load every quick-start-guide, user manual and reference guide we offer. Simply plug the the unit into a USB port on any computer and you have instant access to every manual. But the main purpose is to provide a quick and easy way to transfer selected video files to another computer or for the police. The video below explains.
LCD Monitor - Not Included
We offer standard and widescreen LCD monitors that operate exceptionally well with our systems, but we do not package them with our kits. The variety of low cost monitors on the market is incredible and any standard or wide screen LCD monitor or TV with a VGA input will operate with this DVR. The DVR also has a BNC output so analog CCTV monitors are compatible as well. Buy from us or provide your own, either way we support you 100%.
The cameras in this kit are equipped with Infrared LED’s. The LED’s cast out infrared light the human eye cannot see, but the camera can. During the day the camera produces vivid color video, when the light level drops below a minimum point the camera automatically switches the IR system on. The camera then produces very high quality black and white night vision video.
USA Based - Unlimited Technical Support
We are an American owned company and we provide USA based, Free, Unlimited, Life-time Technical Support for all the equipment we offer. Don’t hesitate; if you have a simple question or need help with remote viewing setup or trouble shooting…our professional, friendly technical staff is here and ready to help! Many times we can resolve an issue by remotely logging into the system and solving the issue in minutes. We’re here and ready to help!
Our Quality GuarantyWe only offer reliable equipment that has been completely tested and has a proven track record. Each item is shipped in new condition and includes an easy to follow user guide written in clear English. In addition, we test each item at our facility prior to shipping to insure it is operational and meets its advertised performance. Our goal is simple; quality you can count on and 100% customer satisfaction.
Extended 3 Year WarrantyAll equipment is covered under a complete 3 year warranty from the date of delivery. During this time all products are guaranteed against manufacturing and operational defects. In the event of such defects during this period, it is our responsibility to replace the defective item with an exact or comparable product.
...a 5 Star Rating You Can Trust!
We use the internet's most trusted customer review service "Shopper Approved" to document the quality of our surveillance equipment and the superior level of support we provide. All reviews are independently collected and guaranteed to be authentic.
We pride ourselves on meeting our customers’ expectations! Our efforts have earned thousands of 5 star customer reviews. Click on the "Award Button" to check out some of our latest 5 Star Reviews!
- Video Input 1: 30fps (Live) HD 720p Resolution (1280x720 pixels)
or 15fps (Live) HD 1080p Resolution(1920 x 1080 pixels)
- Video Input 2: 30fps (Live) HD 720p Resolution (1280x720 pixels)
or 15fps (Live) HD 1080p Resolution(1920 x 1080 pixels)
- Video Input 3: 30fps (Live) HD 720p Resolution (1280x720 pixels)
or 15fps (Live) HD 1080p Resolution(1920 x 1080 pixels)
- Video Input 4: 30fps (Live) HD 720p Resolution (1280x720 pixels)
or 15fps (Live) HD 1080p Resolution(1920 x 1080 pixels)
- Video Inputs: 4 channel,BNC,1.0Vp-p,75Ω
- Video Outputs: HDMI & VGA
- Audio Inputs: 1 channel ,RCA, 200-2800mV,30KΩ
- Audio Outputs: 1 channel ,RCA, 200-3000mV,5KΩ
- Trigger recording: PTZ movement, tour, alarm, e-mail & FTP
- Net Interface: RJ-45 (10M/100M)
- PTZ Control: 1 RS485
- USB Interface: 2* USB2.0 port for mouse and backup
- Main Processor: High performance embedded microprocessor
- Operating System: Embedded LINUX
- Hexaplex Operation: live, recording, playback, backup & remote access
- User Interface: GUI, on-screen mouse driven menus
- Controls: USB mouse
- Video Standards: NTSC 525 line,60 f/s
- Video Compression: H.264 main profile
- Video Recording: 720p NTSC 1f/s-30f/s;
- Motion Detection Zones: 396(22*18)detection zones,Sensitivity:1-6(6 is highest)
- Trigger recording: movement, e-mail & FTP
- Recording Mode: Manual, Alarm, Motion Detection, Continuous
- Playback: Max 4 channels simultaneously
- Smart Phone Apps: Iphone - Meyepro+, Android – Meyeprohd
- Backup Space Occupation: Audio28.8MB/H Video150-200 MB/H
- HDD Management: Hard disk hibernation technology, HDD faulty alarm & Raid(Redundancy)
- Backup Mode: Network download/Flash stick
- Hard Disk Capacity: 2 SATA port (Max 8 Terabytes)
- Environmental Power: Supply 12V/4A
- Power: 19V/3A
- Working Temperature: 0-55C
- Working Humidity: 10%-90%
- Dimension: Packing size 382*258*60mm
- Weight: 3.5kg
- Mounting: Desktop
Our Equipment is Designed for Do-It-Yourself Installation
You don't have to be a Pro to install our systems. Each kit includes everything you need for a quick and easy installation.
Our Kits Feature
- Simple instructions
- Easy installation
- All part & equipment needed
- Simple start-up programming
- User friendly controls
- Most reliable equipment available
- Unlimited Technical Support
Simple as 1-2-3#1. Pull a video-power cable from the DVR to each of the camera locations.
#2. Plug the video and power pigtails from the camera into the video-power cable. Mount the Camera.
#3. Plug the video cable pigtail into the DVR and the power wire pigtail into the power supply.
VIDEO SURVEILLANCE MADE SIMPLE
An easy to follow guide for the beginner!
- Types Of Suppliers
- Wireless Camera Myths
- Understanding Resolution
- The Different Technologies
- Selecting the Right Camera
- Capturing License Plates
- Pan-Tilt-Zoom Cameras
- Matching Cameras to DVRs
- Remote Viewing
- Wire & Power Tips
- System Design & Choice
- General Advice
- Installation Tips
- Video Library
- State Laws
- Crime Trends
- Basic Terms
- Our Color Code System
About this Guide
There are thousands of different types of security and surveillance solutions on the market, and finding the one that best fits your needs...at the right price...can be confusing. The truth is, selecting the right equipment and installing it yourself is a lot easier than you may think. Spending a few minutes to study this guide will allow you to make an informed and smart choice. Plus you'll sound like an expert when you are talking to others about video surveillance.
Customer Support Package & CD
Each order comes with a Customer Support Package in advance, providing shipping and delivery details, as well as information on how to get started. Included with the package is a customer support CD, which includes all the manuals and guides you'll need. The CD is an invaluable resource for quick reference on "How-to", including technical details on each product.
- Customer Support CD Main Menu
- System Setup - Quick Start Guide
- How-to Guides
- CCTV700 Series Manuals
- HD-SDI Series Manuals
- HD-IP Series Manuals
- TeamView Remote Support Software
- Router Port Forwarding Manuals
New System Quick-Start
In this guide we will walk you through the initial setup and testing of the DVR system. We have factory tested each major component before shipping. However pretesting the equipment before installation will help you learn how to use the system and assure proper operation. Please follow the steps as described. In the end it will save you time and effort!
This manual is indented to provide general knowledge of how to get a system operating. If you require more detailed information please refer to the many “How to Guides” and manuals we have provide in the green Customer Support CD that we have included with your purchase. The manuals can also be accessed Here
The PDF version of this guide can be downloaded Here
In order to get started, we recommend clearing off a table, or workbench so you can set the system up in a controlled environment. Once you have the work area clear and all the equipment unboxed you can refer to the following pretest checklist. Make sure you keep ALL boxes and packaging in case an item needs to be returned.
- Unpack one of your cables for testing. If it’s premade, use the shortest length. If you are making your own cable, make one for testing at a smaller length. How to make a BNC fitting is found here.
- Unpack your power supply for the cameras. If you are using individual power packs for each camera, you will only need one.
- Unpack the DVR and plug it in with the power supply that was included with it.
- Connect your test cable to the camera using both the provided ends, and make sure the power supply is connected to an outlet as well.
- Connect your monitor to the DVR unit with the appropriate cable.
STEP 1: DVR Testing
Now that you have unboxed your equipment, it’s time to test the video ports on the DVR. Before you can test the ports, you will have to plug the DVR into a power source. Only use the power supply that came with the DVR accessories.
Once you have the power supply plugged in, you will have to connect a monitor to the DVR in order to see the video. This monitor can be connected with a VGA cable, or an HDMI cable.
Once you have the monitor connected, and the DVR powered on, it’s time to test the video ports. Go ahead and connect your test cable to each port on the back of the DVR, and wait for the video to appear on screen. If any of the ports fail to show a video, please give us a call at 1-800-431-3056. Once you have verified all the ports display video you can start testing cameras.
Make sure to leave that cable and power supply connected to the DVR for the rest of the tests.
STEP 2: Camera Testing
Now that we’re testing cameras, unbox all the cameras that you have, and set them on the table close to you. Using the same cable as before, connect each camera one at a time. Again, if any cameras don’t show a video, please give us a call at 1-800-431-3056. Once you have verified that all the cameras are working, you can move on the final test.
STEP 3: Test Cables and Power
The last step to testing each part is to make sure the other cables and power supplies are operating. If you don’t have any more cables or power supplies to check, you can move on to the next page. Otherwise, you will simply replace the cable we used previously with one that hasn't been tested. Same with power, just replace the power supply with one that hasn't been tested. You can use the same camera for testing the additional wire and cables.
Depending on your power supply, you might have the plug and play type as shown above, or you may have a multi-camera power supply as shown in the photo below. If you have a multi-camera power supply, please make sure you follow the instructions printed on the inside of the box. Typically, the power cables terminate directly to the power supply, so there is usually a (+) row and a (-) row. Either way, it’s important to test all your adapters/channels to make sure there are no issues. If any of these cables or power supplies don’t work, give us a call at 1-800-431-3056.
STEP 1: Setting up the DVR
Now that you have tested the DVR, it’s time to set it up for operation. Please make sure you have the owner’s manual for your DVR handy, as you will need it to set the system up. The owner’s manuals are included on the GREEN Backstreet Surveillance CD that came in the folder with your invoice. All manuals can also be found on our website under guides and manuals located on the left side column of any web page. Please consult your owner’s manual for specific information regarding the setup process. Unpack the rest of the accessories that came with the DVR. They will usually include a mouse, and remote control as well. Please refer to the owner’s manual for a complete list of accessories.
PLEASE NOTE:The DVR is intended to be used with a mouse. You may use the remote control if you like, but typically the mouse is a little easier.
You should already have the monitor connected to the DVR, so all that’s needed is to turn the unit on. Once it starts it will launch the “start-up wizard” which is basically an initial configuration. You will need to go through this wizard, and change settings that are applicable. Things like the current date, or custom recording schedule. By default the units are programmed to record all channels in motion activated mode. Each unit is programmed slightly different, please refer to the specific owner’s manual for your DVR to see the options listed in the wizard.
You can come back to these settings later, so don’t worry if you skip a step or accidentally close the wizard. The important things to setup at this point in time is the date/time, as well as the recording schedule. Once these have been set you can move the DVR to its permanent location.
The last connection that needs to be made is optional, but you will need it for any remote viewing capabilities. There is a LAN port on the back of the DVR, and it accepts an Ethernet cable. This cable will need to be directly connected to your router or modem. This step is best saved for when the DVR has been tested and configured.
Once the connections have been made, and the DVR has been configured it’s time to run your cables.
STEP 2: Cable Installation and Fittings
Depending on the type of cabling you purchased, you may or may not need to install the fittings. If you don’t need to install your own fittings, you can skip this section, and move on to the premade cable section.
DO NOT CUT THE ENDS OFF PRE-MADE CABLES OR CAMERAS! Doing so will void the warranty, and make your install that much more difficult. We have cable adapters and connectors you can use if you have a unique setup.
DIY BNC Fitting
If this is your first time making this type of cable, please refer to the “How to make a BNC fitting Connection” guide in the Appendix of this guide, it can also be found at http://www.backstreet-surveillance.com/cctv-guide-manuals.html.
This will explain the use of the coax stripper tool, as well as how the fittings should be installed. Once you’ve familiarized yourself, you can cut the correct length first, and then put the fittings on. We recommend cutting an extra 5 feet past your measurements.
Once you have cut the cable to length you can use the tool to strip the shielding off the cable, and then attach the fittings. You will also need to put any applicable power fittings on the cable. To do this, you will expose the red and black power cables, and simply screw them into the fittings. These power fittings vary depending on the power supply you are using, so feel free to call us at 1-800-431-3056 if you have any questions regarding this.
These cables already have the fittings installed, so it’s a plug-and-play setup. The side with the male power plug goes into the camera, and the side with the female power plug goes into the DVR/power supply. Both ends have a BNC fitting, so you push it on the connector, then twist it to lock it into place.
With either type of cable, it’s recommended that they are tested before being installed.
STEP 3: Camera Adjustments
Manual Zoom Lens
You may have purchased cameras with an adjustable lens, and if so, they will need to be configured to have the best possible image. Before the cameras are installed, make sure the adjustments work. There are usually two screws on the camera itself, one being zoom the other focus. At this point, it doesn't matter if it’s adjusted the way it needs to, just that the adjustments work. Otherwise, if they all do, go ahead and install the cameras. Once they are installed you can make the final adjustments to the camera. These adjustments can be hard to make on your own, so having someone to help you will make the process much easier.
There are some variations in these cameras, so please take a look at the owner’s manuals or quick start guides for your specific camera. They can be found here: http://www.backstreet-surveillance.com/cctv-guide-manuals.html.Fixed Lens
Fixed lens cameras don’t really need adjustments. As long as they have been tested, and verified, then you can install them.OSD Menu
Regardless of whether the camera is a fixed lens or adjustable, they may have what’s called an “OSD menu”. This is usually accompanied by the “OSD button”. This is a small round button that is on the pigtail of the camera. Please note, these adjustments do not need to be configured. These are advanced camera options that are set at the factory. The key is to make sure that button isn’t accidentally pressed during the installation. If so, some settings might be changed, and you will have to use that button to change them back. For a complete guide on the OSD menu, and its operations, you can go here: http://www.backstreet-surveillance.com/cctv-guide-manuals.html.
If you have purchased HD-SDI cameras, these often come with 2 video leads, and a power lead. One video lead is analog, and won’t show any video when connected to the DVR. Please make sure you check the quick start guide for that camera to learn which one is SDI, and which one is analog, but typically YELLOW is analog and GREEN/BLACK is SDI.
PTZ cameras are in a class of their own, but that doesn't mean they shouldn't be tested. In fact, because the installation is more difficult, it becomes that much more important to make sure the camera works before you put it in place.
Your PTZ camera should come with its own power supply in the box, and that’s the one to test it with. PLEASE NOTE: Not all power supplies will look the same. The owner’s manual for your PTZ camera will clarify any confusion.
Using the same video cable, you can connect that PTZ camera to the DVR to check the image. Once the video cable is connected you can plug in the power supply for that PTZ camera. Once done, that camera will move around on its own for about 1 min. This is just the startup test the camera does to make sure the motors work. If you plug in the camera, and it doesn't move, please give us a call at 1-800-431-3056. As long as you verified the camera moves when plugged in, and that there is good video on the screen, then it’s ready to be installed.
Please note, if you are using a joystick controller with the PTZ camera, it’s worthwhile to test the control connections as well. That way you can be sure how to connect and control the camera prior to the installation. Please refer to our PTZ quick start guide, and SDI-CCTV PTZ installation instructions here for more info: http://www.backstreet-surveillance.com/cctv-guide-manuals.html
STEP 4: Camera Mounting and Installation
Dome cameras usually just unscrew and come apart. Once it’s taken apart then you can install the base plate on either a wall or ceiling, and the screw the rest of the camera into place. For more information on this, please refer to the “Camera Installation Guide” found in the How-To section here: http://www.backstreet-surveillance.com/cctv-guide-manuals.html
Bullet cameras install fairly easily as well, simply screw the base plate attached to the adjustment arm to either the wall or ceiling. Again, please refer to our “Camera Installation Guide” found in the How-To section here: http://www.backstreet-surveillance.com/cctv-guide-manuals.html
Included in your purchase is technical support for as long as you own the DVR. If you need any assistance with remote viewing, or setup we will be glad to assist you over the phone. In order to expedite the process, please have the following steps completed BEFORE you call in for support.
- Verify you are at the same location as the DVR. We cannot assist when you are at a remote location.
- Verify the cables are all seated tight in the DVR, and that no connections are missing. ;i>
If we are setting up remote viewing we generally need access to a computer that’s on the same network, as well as some other things. Please complete the list below before calling for remote viewing setup.
- Please make sure Team Viewer has been installed. You can download a copy of that at www.teamviewer.com. (When asked, do a “basic install” for “personal, non-commercial use”)
- We will also need to access your router during this process, meaning we need the administrator password for your router. Some routers provide a way to reset this password if you’re not sure what it is, otherwise your Internet Service Provider can tell you this password.
Once these steps have been completed please give us a call at 1-800-431-3056. Please keep in mind our technical support is open Mon-Fri 10 AM – 7 PM Eastern.