Security Camera Systems Designed by Experts & Installed by You!

Audio-Mixer 5 Channel


Reference #A-14886

Commercial Amp & Mixer

  • - Supports background music distribution
  • - 5-channel mixer/amplifier
  • - Supports 20 Speakers

Check out our latest reviews from REAL customers.

Audio-Mixer 5 Channel

Double click on above image to view full picture

Zoom Out
Zoom In

Simplify the task of running distributed audio for restaurants, hotels, or anywhere large areas need background music and/or paging address systems.


  • 5-channel (3 microphone and 2 line) mixer/amplifier
  • Amplifier rated for 120 watts
  • 70V, 100V, and low impedance 4~16 ohm speaker output options
  • Built-in rack mount ears and 2U height for mounting in a standard 19" equipment rack
  • Unbalanced front panel input for MIC 1
  • Both balanced XLR and unbalanced TRS and RCA rear panel inputs for MIC 2 and MIC 3
  • Phantom power option for MIC 2 and MIC 3
  • Two unbalanced RCA auxiliary/line inputs
  • One EMC priority input
  • Master volume, bass, and treble controls
  • Front panel level controls for all inputs
  • 0-30dB variable muting for all channels except MIC 1 when MIC 1 is in use
  • Built-in short circuit, over-current, and high temperature protection circuits
  • Line level output of mixed signal for connection to other devices

Technically Simple

Our experts have engineered the need for any technical knowledge out of our kits. Artisonce systems have been balanced for maximum performance. The result is easy "Plug & Play" install for our customers. Be assured; NO technical knowledge is needed to properly install our DIY kits. Simply follow our easy to understand quick start guide and your system will be functional in no time. And if you have any questions our experienced professional technical support department is ready to help.

Below is a technical explanation of the complexities of getting a system balanced for best performance. Again, this information is only offered for understanding of the complexity of properly designing a audio distribution system and is not needed for installation.

A constant voltage speaker system differs from a traditional 8-ohm speaker system in that it uses a step-up transformer at the audio source to raise the voltage and lower the current on the transmission line. At the speaker end, a step-down transformer converts the signal back to a normal speaker level voltage. This reduces power loss during transmission, which allows for the use of longer speaker wire runs using smaller gauge wire. Additionally, a constant voltage speaker system allows for the use of multiple speakers on each channel, without the need for complicated impedance calculations and configurations.

In a constant voltage system, all speakers on a given channel are connected in parallel and the complicated impedance calculations are replaced by simple wattage calculations. For example, if you want to connect two speakers per channel in a traditional 8-ohm speaker system, you must either connect them in series, which results in an overall 16-ohm impedance, or in parallel, which results in an overall 4-ohm impedance. In the first case, the 16-ohms impedance effectively halves the output power of your amplifier, resulting in lower overall volume levels. In the latter case, the 4-ohms impedance means that your amplifier will have to work harder and must be rated as stable at 4 ohms. Adding a third speaker to the mix would complicate it further, producing either a 24-ohm or 2-ohm overall impedance. On the other hand, with a constant voltage system, you consider first the RMS output wattage of the amplifier. This should be reduced by 20% to compensate for insertion loss. For example, if using a 100-watt amplifier, the total load from speakers should not exceed 80 watts. This amplifier features three microphone inputs and two auxiliary inputs, each of which is active and mixed into the line and speaker level outputs. When an EMC input trigger is detected, all outputs except MIC 1 are muted, allowing for the clear broadcast of important messages. The amplifier can drive a speaker array consisting of one or more speakers presenting a 4~16 ohm load or to one or more 70V or 100V speakers connected in parallel as part of a large public address system.


USA Based - Unlimited Technical Support

We are an American owned company and we provide USA based, Free, Unlimited, Life-time Technical Support for all the equipment we offer. Don’t hesitate; if you have a simple question or need help with remote viewing setup or trouble shooting…our professional, friendly technical staff is here and ready to help! Many times we can resolve an issue by remotely logging into the system and solving the issue in minutes. We’re here and ready to help!

Best Quality

Our Quality Guaranty

We only offer reliable equipment that has been completely tested and has a proven track record. Each item is shipped in new condition and includes an easy to follow user guide written in clear English. In addition, we test each item at our facility prior to shipping to insure it is operational and meets its advertised performance. Our goal is simple; quality you can count on and 100% customer satisfaction.

5 Year Warranty

Extended 5 Year Warranty

Artisonce products are covered under a complete 5 year warranty from the date of delivery. During this time all products are guaranteed against manufacturing and operational defects. In the event of such defects during this period, it is our responsibility to replace the defective item with an exact or comparable product.

Artisonce offers the easiest installation...period! Our simple, easy to follow guide ensures you get it right the first time!
Artisonce Installation Guide

Video Samples
Products Compared