The PG9985 is a fully supervised two-way wireless PowerG flood detector consisting of a probe connected to the device via a 1.8m (6ft) cable. The PG9985 senses the presence of water prompting advance warning of potential flooding. The transmitter is installed at a higher level on the wall with the probe located at floor level or a desired height. In the event that there is a water leak, the probe will detect the moisture and deliver the information to the transmitter.
The PG9985 PowerG Flood Detector is equipped with a visible link quality LED indicator that lets the installer choose the optimal location for installation, eliminating the effort of going back and forth to the keypad. The flood probe of the PG9985 is also supervised to provide an alert upon a probe disconnection. This enhanced feature ensures that the device probe will be operational when it matters most.
Wireless PowerG Flood Detector
Visible signal quality shown on the device
6 foot wire water probe
Visible and transmitted low battery indication
Prolonged battery life (8 years with typical use)
Dimensions: 81 x 34 x 25mm (3.19 x 1.25 x 1in)
Name: DSC PG9985 PowerG Wireless Flood Detector for PowerSeries Neo, PowerSeries Pro and QOLSYS Panels, Johnson Controls, DSC
Category: DSC, Intrusion, Environmental Sensors, Liquid Leak Sensors
Design Tools & Resources
CCTV Security systems consist of several electronic parts. The system requires all of them to be operating flawlessly for reliable operation. When one item fails it can be difficult to find the issues because each part relies on the other for system-wide operation. Follow these simple step-by-step instructions and you'll quickly identify the part causing the problem.
Industry News & Events