GRI WM2600-10
SKU
GRI WM2600-10
$221.00
Quick Overview
Product Overview
GRI WM2600-10 Water Moccasin Sensor Strip with Relay Contact
GRI WM2600-10 Water Moccasin Sensor Strip with Relay Contact
Product Overview
Undetected water damage, such as that caused by leaking pipes or corroded water heaters, cost homeowners tens of thousands of dollars each year. Such repairs are time-consuming and costly to correct. Applications could include computer room sub-floor areas, telephone equipment rooms, bathrooms, laundry rooms, any areas adjacent to a water storage tank or piping. Also evaporative air conditioners, drip pans, overflows and/or drains. Using no mechanical parts, the GRI Water Sensors are triggered by a moisture bridge across the sensor contacts.
The 2600 Closed Loop Sensors use an external power source to energize a built-in relay contact so battery power is not recommended. Used in a closed loop configuration, an alarm condition will occur when moisture is detected, or if power to the sensor is lost, and if the sensor should fail. The relay output can be wired directly to any alarm panel or can be used to actuate an external device, i.e. transmitter, annunciator, etc.
Main Features
2600 Water Sensor Built Into A 10 Foot Mesh Water Strip Sensor For Perimeter Or Large Area Flood Detecting
Ideal For Basement Floors/Walls, Computer Server Rooms, Water Pipes, Attics Or Anywhere Water Damage Could Occur Up To Five 10 Foot Extension Probes With The WM10-P
General Information
Name: GRI WM2600-10 Water Moccasin Sensor Strip with Relay Contact, George Risk Industries, George Risk Industries
Category: George Risk Industries, Intrusion, Environmental Sensors, Temperature & Flood Sensors
Undetected water damage, such as that caused by leaking pipes or corroded water heaters, cost homeowners tens of thousands of dollars each year. Such repairs are time-consuming and costly to correct. Applications could include computer room sub-floor areas, telephone equipment rooms, bathrooms, laundry rooms, any areas adjacent to a water storage tank or piping. Also evaporative air conditioners, drip pans, overflows and/or drains. Using no mechanical parts, the GRI Water Sensors are triggered by a moisture bridge across the sensor contacts.
The 2600 Closed Loop Sensors use an external power source to energize a built-in relay contact so battery power is not recommended. Used in a closed loop configuration, an alarm condition will occur when moisture is detected, or if power to the sensor is lost, and if the sensor should fail. The relay output can be wired directly to any alarm panel or can be used to actuate an external device, i.e. transmitter, annunciator, etc.
Main Features
2600 Water Sensor Built Into A 10 Foot Mesh Water Strip Sensor For Perimeter Or Large Area Flood Detecting
Ideal For Basement Floors/Walls, Computer Server Rooms, Water Pipes, Attics Or Anywhere Water Damage Could Occur Up To Five 10 Foot Extension Probes With The WM10-P
General Information
Name: GRI WM2600-10 Water Moccasin Sensor Strip with Relay Contact, George Risk Industries, George Risk Industries
Category: George Risk Industries, Intrusion, Environmental Sensors, Temperature & Flood Sensors
- - GRI WM2600-10 Data & Specifications Sheet
- - Warranty Provided by Manufacturer
- - Allow 3-5 Days Before Shipping
