AL802ULADA is an extremely cost effective voltage regulated remote NAC Power Extender. It may be connected to any 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC) expansion (supports ADA requirements) and providing auxiliary power to support system accessories.
2-wire horn/strobe Sync mode allows audible notification appliances (horns) and visual notification appliances (strobes) to be silenced/deactivated at the same time.
Sync protocols include Potter/Amseco, Gentex®, System Sensor®, and CooperWheelock®.
Temporal Code 3, Steady Mode, Input to Output Follower Mode (maintains synchronization of notification appliances circuit).
Compatible with 12VDC or 24VDC fire panels.
Output loop supervision steered to Input 1 or Input 2.
Signal circuit trouble memory (helps identify intermittent loop problems).
Common trouble input and output for external trouble signals tie-in.
Ground fault detection.
Short circuit and thermal overload protection
Built-in charger for sealed lead acid or gel type battery backup
Zero voltage drop upon transfer to battery backup
AC input and DC output LED indicators
AC fail supervision (form "C" contact rated @ 1 amp 28VDC)
Name: Altronix AL802ULADA NAC Power Supply, 2 Class A or 4 Class B Outputs, 24VDC at 8A, Red BC400 Enclosure (Replaces AL800ULADA), Altronix Corporation, Altronix
Category: Altronix, Batteries & Power Supplies, Power Supplies & Boards, Power Supplies
Design Tools & Resources
CCTV Security systems consist of several electronic parts. The system requires all of them to be operating flawlessly for reliable operation. When one item fails it can be difficult to find the issues because each part relies on the other for system-wide operation. Follow these simple step-by-step instructions and you'll quickly identify the part causing the problem.
Industry News & Events