Altronix EBRIDGE1ST

Product Overview

eBridge1ST EoC transceiver transmits data at 25Mbps over Coax cable to a paired eBridge receiver and provides power in a PoE+ compliant format to an enabled device/camera. The eBridge receiver is available in various options (see compatibility list below/Altronix.com), including built-in midspan, or for use with an external midspan, such as the Altronix Netway series to facilitate network applications. The receiver passes PoE+ power over the same coax cable to the eBridge1ST transceiver, which, in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost-effective solutions for IP devices. They can be installed at distances greater than 500m. They provide a simple way to replace legacy analog products with new IP devices over existing coax.

Applications:
Retrofit digital IP cameras in an analog CCTV installation.
Works with IP Megapixel and non Megapixel cameras.
Extend Network link distance in an industrial environment over 610m.
Upgrade deployed CCTV Coax to a digital network in Retail, Casinos, Airports, Schools, Hospitals, etc.

Main Features
Connect different types of media within a network with this single port
With Twisted Pair cable, get the desired data transfer rate up to a required distance
With 10/100Base-TX technology get up to 100Mbps data transfer rate over twisted pair cable

General Information
Name: Altronix EBRIDGE1ST EoC Single-Port Small Transceiver, 25Mbps, Passes PoE/PoE+ from Receiver, Requires Compatible Receiver, Altronix Corporation, Altronix
Category: Altronix, Data Comm & Networking, Media Converters & Transceivers, Media Converters