The 120T/4473 requires that a 3/4" hole be drilled for the switch and 3/8" hole for the magnet. The 3/4" switch mounting is desirable since the extra wire and connections can be more easily inserted into the larger hole for concealment. Also, should the need arise for testing or replacement, it would be easy to pull the switch, extend the extra wire and access the original connections. Installation is further enhanced by using a smaller 3/8" diameter magnet to avoid the need to center a larger hole in a 1" to 1 1/2" thick door or window. This will allow you to offset the magnet should it be required.
The 120T/4473 switch set was developed for and should only be used in openings with wooden or aluminum frames.
Available in closed loop, open loop and SPDT
Wire leads or terminal blocks
Available with new rare earth Magnets
Longer Leads, Zip Cords, or Jacketed Cable on Request
Built-in Resistors and Diodes Available on Request
Switches or Magnets are Available Separately
Supervisory Loops Available
Name: GRI 120T-12 120T Series 3/4" Switch 3/8" Magnet Recessed Switch Set, Standard Gap, 10W, 200VDC, 0.50A, Closed, N/O, A, White, George Risk Industries, George Risk Industries
Category: George Risk Industries, Intrusion, Alarm Contacts, Magnetic Contacts
- - GRI 120T-12 Data & Specifications Sheet
- - Warranty Provided by Manufacturer
- - Allow 3-5 Days Before Shipping
Design Tools & Resources
CCTV Security systems consist of several electronic parts. The system requires all of them to be operating flawlessly for reliable operation. When one item fails it can be difficult to find the issues because each part relies on the other for system-wide operation. Follow these simple step-by-step instructions and you'll quickly identify the part causing the problem.
Industry News & Events