GRI 4473-W (QTY of 10)
SKU
GRI 4473-W
$68.00
Quick Overview
Product Overview
GRI 4473-W 3/4" Switch 3/8" Magnet Recessed Switch Set, Press Fit, 1/2" Standard Gap, 10W, 200VDC, 0.50A, Closed Loop, N/O, A and Screw Terminals, White (QTY of 10)
GRI 4473-W 3/4" Switch 3/8" Magnet Recessed Switch Set, Press Fit, 1/2" Standard Gap, 10W, 200VDC, 0.50A, Closed Loop, N/O, A and Screw Terminals, White (QTY of 10)
Product Overview
The 120T/4473 requires that a 3/4" hole be drilled for the switch and 3/8" hole for the magnet. The 3/4" switch mounting is desirable since the extra wire and connections can be more easily inserted into the larger hole for concealment. Also, should the need arise for testing or replacement, it would be easy to pull the switch, extend the extra wire and access the original connections.
Installation is further enhanced by using a smaller 3/8" diameter magnet to avoid the need to center a larger hole in a 1" to 1 1/2" thick door or window. This will allow you to offset the magnet should it be required.
The 120T/4473 switch set was developed for and should only be used in openings with wooden or aluminum frames.
Main Features
Recessed Magnetic Contact
Press To Fit
Also Available in Stubby Version
Available in closed loop, open loop and SPDT
Wire leads or terminal blocks
12” #22AWG Leads or Screw Terminals
Available with new rare earth Magnets
Longer Leads, Zip Cord or Jacketed Cable Upon Request
Hermetically Sealed
Plated Contacts Resist Sticking or Freezing
Built-in E.O.L. Resistors and Diodes Upon Request
Supervisory Loops Upon Request
Switches and Magnets Available Separately
Colors: White, Brown, Gray, Black
Lifetime Warranty
General Information
Name: GRI 4473-W 3/4" Switch 3/8" Magnet Recessed Switch Set, Press Fit, 1/2" Standard Gap, 10W, 200VDC, 0.50A, Closed Loop, N/O, A and Screw Terminals, White, George Risk Industries, George Risk Industries
Category: George Risk Industries, Intrusion, Alarm Contacts, Magnetic Contacts
The 120T/4473 requires that a 3/4" hole be drilled for the switch and 3/8" hole for the magnet. The 3/4" switch mounting is desirable since the extra wire and connections can be more easily inserted into the larger hole for concealment. Also, should the need arise for testing or replacement, it would be easy to pull the switch, extend the extra wire and access the original connections.
Installation is further enhanced by using a smaller 3/8" diameter magnet to avoid the need to center a larger hole in a 1" to 1 1/2" thick door or window. This will allow you to offset the magnet should it be required.
The 120T/4473 switch set was developed for and should only be used in openings with wooden or aluminum frames.
Main Features
Recessed Magnetic Contact
Press To Fit
Also Available in Stubby Version
Available in closed loop, open loop and SPDT
Wire leads or terminal blocks
12” #22AWG Leads or Screw Terminals
Available with new rare earth Magnets
Longer Leads, Zip Cord or Jacketed Cable Upon Request
Hermetically Sealed
Plated Contacts Resist Sticking or Freezing
Built-in E.O.L. Resistors and Diodes Upon Request
Supervisory Loops Upon Request
Switches and Magnets Available Separately
Colors: White, Brown, Gray, Black
Lifetime Warranty
General Information
Name: GRI 4473-W 3/4" Switch 3/8" Magnet Recessed Switch Set, Press Fit, 1/2" Standard Gap, 10W, 200VDC, 0.50A, Closed Loop, N/O, A and Screw Terminals, White, George Risk Industries, George Risk Industries
Category: George Risk Industries, Intrusion, Alarm Contacts, Magnetic Contacts
- - GRI 4473-W Data & Specifications Sheet
- - Warranty Provided by Manufacturer
- - Allow 3-5 Days Before Shipping
