The Honeywell Home 5809SS Wireless Fixed Heat And Rate-of-Rise Temperature Sensor offers expanded fire detection and installation flexibility. It is ideal for hard-to-wire locations and applications that require more than smoke detection. This is a fast and easy install with no wires to run.
The 5809SS contains a built-in fixed temperature sensor, which will signal an alarm if the environmental temperature rises above 135°F. The 5809SS also incorporates an additional rate-of-rise temperature sensor. Fires typically cause a rapid rise in temperature in the surrounding area. The 5809SS rate-of-rise thermostat senses the rise in temperature and signals an alarm if the increase is 15°F or more per minute. The 5809SS is UL Listed (UL 521) and CSFM approved for commercial and residential applications.
Contains a built-in transmitter which can send alarm, supervisory and battery condition messages to the system's receiver/control unit. Powered by a three-volt lithium battery. If the battery voltage gets too low, the 5809 sends a low battery signal to the control panel
Features a tamper switch, which causes a trouble signal to be sent to the control if the unit is removed from the mounting base
UL Listed for Commercial (when using 5881EHReceiver) or Residential applications
Name: Honeywell Home 5809SS Wireless Fixed Heat and Rate-of-Rise Temperature Sensor, Resideo, Honeywell Home
Category: Honeywell Home, Intrusion, Life Safety Devices, Heat Detectors
Design Tools & Resources
CCTV Security systems consist of several electronic parts. The system requires all of them to be operating flawlessly for reliable operation. When one item fails it can be difficult to find the issues because each part relies on the other for system-wide operation. Follow these simple step-by-step instructions and you'll quickly identify the part causing the problem.
Industry News & Events