GEM-RECV Series receivers are the hardwired interface to Napco's Wireless-Ready Control Panels. The wireless system comprises a compatible GEM-Series control panel, at least one GEM-RECV receiver and one or more companion GEM-Series transmitters. The transmitters may be wireless smoke detectors, space-protection devices, window/door sensors, or other devices that report zone status and supervision information to the receiver without the use of wires. The receiver is connected to the control panel's 4-wire bus. The receiver monitors each transmitter, updating transmitter status as reports are received, and conveys this information to the control panel. Also monitored is the elapsed time since the last report from each transmitter. If no report is received within a programmed time, a Supervisory Failure will result.
Operating Temperature: 0°C to 49°C
Storage Temperature: 20°C to + 85°C
Power Requirements: 12VDC, 70mA (supplied by panel)
Antenna: 1/4" - wave (2)
Dimensions: 6-3/4" x 3-5/8" x 1-1/2" (W x H x D)
Note: For UL Residential Installations, a maximum of 200 supervisory reporting transmitters may be installed. This does not include GEM-KEYF or GEM-WP remotes.
Category: Access Control, Alarms & Intercom, Burglar Alarms, Control Panels/Keypads
- - Warranty Provided by Manufacturer
- - Allow 3-5 Days Before Shipping
Design Tools & Resources
CCTV Security systems consist of several electronic parts. The system requires all of them to be operating flawlessly for reliable operation. When one item fails it can be difficult to find the issues because each part relies on the other for system-wide operation. Follow these simple step-by-step instructions and you'll quickly identify the part causing the problem.
Industry News & Events