Animal immunity & built-in temperature sensors. Advanced PIR1680 Series Passive Infrared Motion Detectors exemplify Napco sensor technology’s innovation, increasing dependability without compromising intruder "catch" sensitivity. For applications where animal/pet immunity is key, the PIR1680PT supports 65lb. (29kg) pet protection within its 45' (13.7m) range. Or, the original model PIR1680, has a 50' (15.2m) range and offers nominal 20lb. (9kg) animal/rodent immunity. Outstanding false alarm rejection in both models is made possible with their advanced microprocessor that has been embedded with a library of valid and false alarm signal signatures—enabling the PIR to differentiate intruders from animals and other traditional false alarm sources. In addition to proven intruder-detection circuitry, these units also Feature a built-in temperature sensor – at no additional charge—so you can provide traditional security, as well as climate security from heat and/or freeze damages, when HVAC systems fail, before pipes burst or décor, pets or perishables are ravaged by heat extremes, otherwise left unchecked.
Broad range and wide angle coverage suitable for most residential & commercial installations:
PIR1680PT 45 x 45' (13.7 x 13.7m)
PIR1680 50 x 50' (15.2m x 15.2m)
Pet/animal immunity up to 65lbs.
Unsurpassed PIR False Alarm Rejection
Active Self-Test Mode
Optimized field-of-view with custom-engineered aspheric optics
Superior RFI-/EFI-/lightning-shielded protection
Critical Range Control
Automatic Temperature Compensation
Fast, flexible mounting
Added False Alarm Prevention Features
Microprocessor: 2K ROM with A-D Converter
Operating temperature*: -10 to +50 degrees C (14° to 122° F)
Freeze damage alert: 40°F (4°C)
Heat damage alert: 90°F (32°C)
Mounting: Wall or corner, 12' (3.6m) max.; For pet/animal applications 7' (2.1m) is recommended.
Output relay: Form A; normally closed
Relay time: Approx. 3 seconds
Alarm Relay: 100mA, 24Vdc with internal 10 ohm current limiting resistor
Multi-mode Trouble Output (Open collector)
Self-Test Interval: 11 - 16 hrs.
Power supply requirements: Filtered 10.6 to 16VDC nominal with battery backup form the control panel.
Current drain: 28mA (idle/alarm) at 12VDC (nominal)
Dimensions: 3.3"H x 2.5"W x 1.9"D (8.4 x 6.4 x 4.8 cm) (HxWxD)
Shipping weight: 5 oz (142 gm)
Category: Access Control, Alarms & Intercom, Burglar Alarms, Control Panels/Keypads
- - Warranty Provided by Manufacturer
- - Allow 3-5 Days Before Shipping
Design Tools & Resources
CCTV Security systems consist of several electronic parts. The system requires all of them to be operating flawlessly for reliable operation. When one item fails it can be difficult to find the issues because each part relies on the other for system-wide operation. Follow these simple step-by-step instructions and you'll quickly identify the part causing the problem.
Industry News & Events